Overhead cupboards Clearance between benchtop and overhead cupboards to be a minimum of 600mm. The microwave shelf is 500mm above the benchtops to keep the microwave at a useful level. The overall height of a standard kitchen is 2070mm plus or minus 5mm. Range hood height does not depend on fan size. The ideal length of the work triangle lies between 4000 mm 13 and 6000 mm 19. Where clearances are not specified by the manufacturer then clearance distances shall be as described in ASNZS 5601. Standard wall cabinets are 720mm high. Kitchen hood height does not depend on how tall your range hood is. Cabinets can be deeper if they contain under-bench appliances like dishwashers or large under-mount sinks - or shallower if space is limited. These measurements are a guide only.

For those with large kitchens consider having 2 or 3 separate zones. These measurements are a guide only. As for the cupboards height from the benchtop you can dictate how much clearance they should go if you want 500 or 500 mm so be it. However if you wish to install a gas cooktop you need to allow for at least 650mm. The kitchen design company has said the upper cupboard depth needs to be 425mm the lower bench is 600mm deep and the distance between the benchtop and upper cupboard is 600mm. STANDARD KITCHEN BENCHTOP HEIGHT The recommended standard kitchen benchtop height is 900mm - 20mm. Kitchen hood height does not depend on how tall your range hood is. Check your rangehood set out requirements they have a max sucking distance to set this height. Read the manual of the cooktop and rangehood manufacturers and follow their instructions. The upper cupboard starts just above my eye level.

A standard microwave opening is 600mm w x 400mm h A standard fridge measures around 1700mm h x 720mm w A sink unit of standard size measures around 600mm to 800mm. Where clearances are not specified by the manufacturer then clearance distances shall be as described in ASNZS 5601. Range hoods of all sizes must be mounted either between 28 and 36 inches above the cooktop for indoor hoods or 36 to 42 inches above the cooktop for outdoor hoods. Floor cabinets are usually 720mm high. The height of kickboards beneath the bottom of the cabinets should ideally be between 100mm and 200mm. Benchtops are generally 900mm from the ground. Check your rangehood set out requirements they have a max sucking distance to set this height. Overhead cupboards Clearance between benchtop and overhead cupboards to be a minimum of 600mm. In accordance with the cooking appliance manufactures instruction. The kitchen design company has said the upper cupboard depth needs to be 425mm the lower bench is 600mm deep and the distance between the benchtop and upper cupboard is 600mm.

STANDARD KITCHEN BENCHTOP HEIGHT The recommended standard kitchen benchtop height is 900mm - 20mm. The upper cupboard starts just above my eye level. Dishwasher cavities normally measure around 860mm h x 605mm w Please note. As for the cupboards height from the benchtop you can dictate how much clearance they should go if you want 500 or 500 mm so be it. A nominal ventilation gap at the front of the safety barrier is recommended and a 150mm minimum ventilationaccess gap between the rear of the safety barrier and back cabinetry are also required. This ensures that you dont hit your head when working at the benchtop. It is accepted and there are AS standards that the distance between gas hobs and rangehood is about 700mm less for electrical or induction surfaces. However the working bench height can be within the range of 850mm to 1050mm. The Australian Standard for domestic kitchen installations AS 4386 sets various minimum requirements for wall cabinet heights. Both my wife and i are 6ft so the slightly higher cupboards are ok.

The height of kickboards beneath the bottom of the cabinets should ideally be between 100mm and 200mm. Where clearances are not specified by the manufacturer then clearance distances shall be as described in ASNZS 5601. Your overhead cupboards will be between 600mm and 700mm above your benchtop. Cabinets can be deeper if they contain under-bench appliances like dishwashers or large under-mount sinks - or shallower if space is limited. Check your rangehood set out requirements they have a max sucking distance to set this height. Standard wall cabinets are 720mm high. However the working bench height can be within the range of 850mm to 1050mm. A 100mm clearance is required between the underside of the benchtop and the in-bench cooktop safety barrier. The microwave shelf is 500mm above the benchtops to keep the microwave at a useful level. Overhead cupboards Clearance between benchtop and overhead cupboards to be a minimum of 600mm.